SAVE 10% FOR FIRST TIME CUSTOMER WITH CODE: DKNY10
Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products as they will leave a residue behind that will prevent the sticker from adhering well.
Prepare the sticker for application by firmly rubbing a squeegee on clear OR tan transfer tape.
Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.
Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. Smooth out any air bubbles now while your sticker is covered with the application tape
Slowly peel the clear OR tan transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.
*Use a pin to poke any air bubbles in the center and push the air out through the hole.
*For best results do not apply a sticker in extreme hot or cold temperatures.
